SimScale simulation projects by raj_km_saini | Page 1

raj_km_saini's profile

This project simulates sloshing of fuel inside a moving fuel-tank. - Copy

The results of this SimScale validation case of a centrifugal pump are compared with the results of the study by WANG Xiu-yong and WANG Can-xing entitled Performance Prediction of Centrifugal Pump Based on the Method of Numerical Simulation.

The SimScale subsonic solver was used. - Copy

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used.

This project aims to showcase the different configuration options for the standard meshing tool, including basic and advanced settings. The various refinements are also covered.

Analyse the duct positioning to have effective ventilation system

Building Vortex Shedding and Wind Load Analysis

This project simulates instantaneous turbulent wake of a cylinder body via LES method.

This project shows the creep analysis of a superheater boiler pipe.

Aerodynamic simulation of the flow over a truck

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project includes the shell and tube heat exchanger simulation using the conjugate heat transfer technique, abbreviated as CHT. Conjugate heat transfer defines processes which involve variations of temperature in solids and fluids due to thermal interactions.

Heat Exchanger Thermostructural Simulation

Related to step-by-step tutorial of the biomedical workshop (session 1)

https://www.simscale.com/forum/t/biomedical-engineering-workshop-session-1-stress-shielding-in-a-hip-joint-prosthesis/36830/3

This project shows the bending of an Aluminium pipe through rolling process.

Tutorial - Automated Hex-dominant for internal flow

Tutorial Hex-dominant Parametric for rotating geometries MRF

Impact Analysis of Skull with and without Helmet

Related to step-by-step tutorial of the biomedical workshop (session 2) https://www.simscale.com/forum/t/biomedical-engineering-workshop-session-2-analysis-of-cardiovascular-stent/36862

Convective Heat Transfer Analysis of a Heat Exchanger

This simulation captures the nuances of turbulent pipe flow.

Tutorial project for setting up the Automated Hex-dominant for internal flow for an angled pipe geometry.

Office Space - ASHRAE - Solve it with SimScale

This project simulates Scalar Transport mixing in turbulent T-Junction pipe flow.

Tutorial project to set up the Hex-dominant Parametric mesh for rotating geometries. This mesh can then be used for MRF and AMI simulations that incorporate rotation effects.

This project simulates Couette flow - flow in annulus fixed-rotating cylinder pair.

Flow Simulation for Mixing Diffuser for Juice Processing

Public Profile

raj_km_saini's profile